NSN 5340-00-243-7481 · NIIN 002437481 · FSC 5340
NO DASHES 5340002437481
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.870 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 3.500 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 2.250 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.204 AND INCHES MAXIMUM 0.212 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.071 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.071 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 2.250 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.594 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.330 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.370 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| HEAT | HEAT TREATMENT | T-4 SOLUTION HEAT TREATED |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 11,T4 |
| SFTT | SURFACE TREATMENT | ALUMINUM ALLOY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ-A-250 TO 11,6061,T4 |
| STYL | STYLE DESIGNATOR |