NSN 5340-00-248-2328 · NIIN 002482328 · FSC 5340
NO DASHES 5340002482328
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BZTP | DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER | INCHES NOMINAL 0.219 |
| AZDE | CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE | INCHES NOMINAL 0.469 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.250 |
| AHMM | LUG WIDTH | INCHES NOMINAL 0.438 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.453 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.641 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.531 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.173 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.040 |
| BZTQ | LUG HOLE DIAMETER | INCHES NOMINAL 0.173 |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| MATT | MATERIAL | CUSHION RUBBER SYNTHETIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5,CONDITIONT |
| STYL | STYLE DESIGNATOR |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 008129076. An older drawing citing one of those numbers resolves here.