NSN 5340-00-270-7258 · NIIN 002707258 · FSC 5340
NO DASHES 5340002707258
In Stock
CLIP,SPRING TENSION
Hardware, Commercial
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.029 AND INCHES MAXIMUM 0.035 |
| ABRY | LENGTH | INCHES MINIMUM 1.030 AND INCHES MAXIMUM 1.070 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| AZWE | DISTANCE FROM LOOP CENTER TO END | INCHES NOMINAL 0.620 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.190 AND INCHES MAXIMUM 1.230 |
| CJYS | LOOP/HOLDING DIMENSION | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.147 |
| ABGL | WIDTH | INCHES MINIMUM 1.865 AND INCHES MAXIMUM 1.885 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS24066/2-244 | 80204 |
| M24066/2-244 | 80205 |
| NASM24066/2 | 80205 |
| MIL-C-24066/2 | 81349 |
| M24066/2-044 | 81349 |
| M24066/2-244 | 81349 |
| 6020-84CC | 91506 |
| MS17160-144 | 96906 |
| 100-300-13-0 | 99378 |
| 6020-84CC | 00779 |
Supersedes
This item replaces cancelled NIIN 009282673. An older drawing citing one of those numbers resolves here.