NSN 5340-00-279-4338 · NIIN 002794338 · FSC 5340
NO DASHES 5340002794338
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 1.250 |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.058 AND INCHES MAXIMUM 0.070 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 1.083 AND INCHES MAXIMUM 1.103 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 1.296 AND INCHES MAXIMUM 1.326 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | CUSHION PLASTIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3651 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM44LC36SH20GT | 22175 |
| MS9349-19 | 96906 |
| MS9349-19 | 0U583 |
| SAE-AS9349 | 0U583 |
Supersedes
This item replaces cancelled NIIN 008313225. An older drawing citing one of those numbers resolves here.