NSN 5340-00-283-0649 · NIIN 002830649 · FSC 5340
NO DASHES 5340002830649
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5 |
| STYL | STYLE DESIGNATOR | |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.423 AND INCHES MAXIMUM 0.453 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.032 |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| MATT | MATERIAL | CUSHION RUBBER |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.608 AND INCHES MAXIMUM 0.638 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.826 AND INCHES MAXIMUM 0.856 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 214-1096P6 | 49956 |
| 52856-6 | 70210 |
| 52856-6 | 72599 |
| AN742D7C | 88044 |
| 5340PL0841579 | 9009H |
| MS21919DG7 | 96906 |
| MS21919DG7 | F3341 |
| 8040 | F3341 |
| MS21919-7 | F3341 |
| 5096D41 | 0AHP5 |
| 812783 | 18876 |
Supersedes
This item replaces cancelled NIINs 001416975 · 002391352 · 002469347 · 002989012 · 005980592. An older drawing citing one of those numbers resolves here.