NSN 5340-00-291-5338 · NIIN 002915338 · FSC 5340
NO DASHES 5340002915338
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY SPECIAL FEATURES |
| FEAT | SPECIAL FEATURES | WEDGE TYPE CUSHION CONSTRUCTION |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | WEATHER RESISTANT |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.032 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.827 AND INCHES MAXIMUM 0.857 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.060 |
| MATT | MATERIAL | BAND STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 4 AND CLASS B |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3209 |
| SFTT | SURFACE TREATMENT | BAND CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 1 CL 2 |
| STYL | STYLE DESIGNATOR | |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.735 AND INCHES MAXIMUM 0.765 |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS21919WG12 | 81343 |
| MIL-C-8603 | 81349 |
| MIL-DTL-8603 | 81349 |
| MS21919WG12 | 96906 |
| 5340002989403 | A00AM |
| 5340002989403 | SCY13 |
Supersedes
This item replaces cancelled NIIN 002989403. An older drawing citing one of those numbers resolves here.