NSN 5340-00-291-5348 · NIIN 002915348 · FSC 5340
NO DASHES 5340002915348
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 4 AND CLASS B |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | WEATHER RESISTANT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 1 CL2 |
| STYL | STYLE DESIGNATOR | |
| SFTT | SURFACE TREATMENT | BAND CADMIUM |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3209 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.842 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| MATT | MATERIAL | BAND STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.032 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.639 AND INCHES MAXIMUM 0.669 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5020590 ITEM 10 | 53711 |
| AS21919WG8 | 81343 |
| MIL-DTL-8603 | 81349 |
| C8603 | 81349 |
| MIL-C-8603 | 81349 |
| 5340PL0845421 | 9009H |
| 5340PL1694820 | 9009H |
| MS21919WGB | 96096 |
| MS21919WG8 | 96906 |
Supersedes
This item replaces cancelled NIINs 006649055 · 010656742. An older drawing citing one of those numbers resolves here.