NSN 5340-00-389-0054 · NIIN 003890054 · FSC 5340
NO DASHES 5340003890054
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.380 |
| AHQZ | FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.120 |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 3.000 |
| AHLU | SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.120 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.060 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.280 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.280 |
| MATT | MATERIAL | STEEL COMP 1010 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD SINGLE MATERIAL RESPONSE FED STD 66,AISI TO SAE 1010 |
| SFTT | SURFACE TREATMENT | PAINT |
| AHLT | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.120 |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 3.000 |
| AHQY | FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.120 |
| AJZU | FIRST LEG STYLE | |
| STYL | STYLE DESIGNATOR | |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.060 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.310 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.380 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.310 |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.560 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 0.810 |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 533938 | 28839 |