NSN 5340-00-396-4913 · NIIN 003964913 · FSC 5340
NO DASHES 5340003964913
In Stock
BRACKET,ANGLE
Hardware, Commercial
Application: ENG J-57
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.979 |
| AGAV | END ITEM IDENTIFICATION | ENG J-57 |
| AKBU | SECOND LEG STYLE | |
| AHLL | FIRST LEG SLOT LENGTH | INCHES MINIMUM 0.340 AND INCHES MAXIMUM 0.360 |
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.800 AND INCHES MAXIMUM 0.820 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 2.340 AND INCHES MAXIMUM 2.360 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.280 |
| AJFP | FIRST LEG END RADIUS | INCHES NOMINAL 0.280 |
| AHLM | FIRST LEG SLOT WIDTH | INCHES MINIMUM 0.216 AND INCHES MAXIMUM 0.226 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.349 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 0.550 AND INCHES MAXIMUM 0.570 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.328 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.328 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| STYL | STYLE DESIGNATOR | |
| AHLG | SECOND LEG CORNER RADIUS | INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.328 |
| MATT | MATERIAL | STEEL COMP 410 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5504 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 0.560 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.280 |
| AHLH | SECOND LEG END WIDTH | INCHES MINIMUM 1.590 AND INCHES MAXIMUM 1.610 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 204016 | 77445 |