NSN 5340-00-415-4866 · NIIN 004154866 · FSC 5340
NO DASHES 5340004154866
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.840 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 1.500 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 0.624 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.240 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| MATT | MATERIAL | TITANIUM ALLOY |
| AKBU | SECOND LEG STYLE | |
| AHLZ | SECOND LEG SLOT LENGTH | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.310 |
| AHMA | SECOND LEG SLOT WIDTH | INCHES MINIMUM 0.216 AND INCHES MAXIMUM 0.226 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| STYL | STYLE DESIGNATOR | |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.312 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 2.384 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.250 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.250 |
| AJFQ | SECOND LEG END RADIUS | INCHES NOMINAL 0.312 |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 4911 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.760 |