ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Fasteners & Fastening Hardware / NSN 5340-00-433-3562
NSN 5340-00-433-3562  ·  NIIN 004333562  ·  FSC 5340
NO DASHES 5340004333562
In Stock

BRACKET,ANGLE

Hardware, Commercial

Technical characteristics

23 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AHRBFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTHINCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.205
AHRAFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTHINCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255
CSSPSECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONASSN STD SINGLE MATERIAL RESPONSE A-S 5510
AKCUSECOND LEG HOLE ARRANGEMENT STYLE
AKAUFIRST LEG HOLE ARRANGEMENT STYLE
AKBUSECOND LEG STYLE
AJFPFIRST LEG END RADIUSINCHES NOMINAL 0.500
AJFQSECOND LEG END RADIUSINCHES NOMINAL 0.500
AHLKFIRST LEG HOLE DIAMETERINCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.210
AHLNSECOND LEG HOLE DIAMETERINCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.210
AHLVSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTHINCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255
ADLLSECOND LEG LENGTHINCHES MINIMUM 0.945 AND INCHES MAXIMUM 0.955
AHLFSECOND LEG WIDTHINCHES NOMINAL 0.500
STYLSTYLE DESIGNATOR
MATTMATERIALSTEEL COMP 321
ADLKFIRST LEG LENGTHINCHES MINIMUM 1.695 AND INCHES MAXIMUM 1.705
CSSQFIRST LEG ANGLEDEGREES NOMINAL 90.0
AHPXSECOND LEG THICKNESSINCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068
AHQNFIRST LEG WIDTHINCHES NOMINAL 0.500
AHLWSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTHINCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.205
AHPWFIRST LEG THICKNESSINCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068
AJZUFIRST LEG STYLE

Cross-references

4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.

Manufacturer part numberCAGE
SAE-AS959296906
MS9592-22296906
MS9592-2220U583
SAE-AS95920U583