NSN 5340-00-443-2111 · NIIN 004432111 · FSC 5340
NO DASHES 5340004432111
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 85.0 |
| FEAT | SPECIAL FEATURES | FIRST LEG EDGE TURNED UP 0.250 IN. H AT 90 DEG ANGLE ALONG THE W,ONE END OF SLOT OPEN AT UPTURNED EDGE |
| MATT | MATERIAL | STEEL |
| SFTT | SURFACE TREATMENT | CADMIUM |
| STYL | STYLE DESIGNATOR | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 3.750 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 8.500 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 2.000 |
| AHLL | FIRST LEG SLOT LENGTH | INCHES NOMINAL 1.937 |
| AHLM | FIRST LEG SLOT WIDTH | INCHES NOMINAL 1.125 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 1.375 |
| AJZU | FIRST LEG STYLE | |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.119 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.119 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 2.000 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 1.000 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 1.000 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.375 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES NOMINAL 0.375 |