NSN 5340-00-478-3540 · NIIN 004783540 · FSC 5340
NO DASHES 5340004783540
In Stock
COVER,ACCESS
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADPA | DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH | INCHES MINIMUM 0.790 AND INCHES MAXIMUM 0.810 |
| ADNU | CORNER RADIUS | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.140 |
| ABRY | LENGTH | INCHES MINIMUM 1.150 AND INCHES MAXIMUM 1.170 |
| ABGL | WIDTH | INCHES MINIMUM 0.640 AND INCHES MAXIMUM 0.660 |
| ABMW | PERIPHERAL SHAPE STYLE | |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| ADPC | DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH | INCHES MINIMUM 0.160 AND INCHES MAXIMUM 0.180 |
| ADPR | BODY THICKNESS | INCHES MINIMUM 0.035 AND INCHES MAXIMUM 0.045 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541 |
| ADPD | DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH | INCHES MINIMUM 0.160 AND INCHES MAXIMUM 0.180 |
| ADPB | DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.310 |
| ADQB | SECURING DEVICE TYPE | THREADED FASTENER |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-270,T6 |
| SFTT | SURFACE TREATMENT | OXIDE FILM |