NSN 5340-00-494-7595 · NIIN 004947595 · FSC 5340
NO DASHES 5340004947595
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.290 |
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 4911 |
| SFTT | SURFACE TREATMENT | CHROMATE ZINC |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE TT--1757 |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| MATT | MATERIAL | TITANIUM ALLOY |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.380 AND INCHES MAXIMUM 0.440 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.016 |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.970 AND INCHES MAXIMUM 1.030 |
| AHQP | FIRST LEG CORNER RADIUS | INCHES MINIMUM 0.280 AND INCHES MAXIMUM 0.340 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.470 AND INCHES MAXIMUM 0.530 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.227 AND INCHES MAXIMUM 0.233 |
| AHLT | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 0.670 AND INCHES MAXIMUM 0.730 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.280 AND INCHES MAXIMUM 0.340 |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 1.930 AND INCHES MAXIMUM 2.110 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.128 AND INCHES MAXIMUM 0.134 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.280 AND INCHES MAXIMUM 0.340 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.016 |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.870 AND INCHES MAXIMUM 0.930 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 1.090 AND INCHES MAXIMUM 1.150 |
| AHLR | SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 1.370 AND INCHES MAXIMUM 1.430 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES MINIMUM 0.280 AND INCHES MAXIMUM 0.340 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| LS5377-6T | 6Z800 |
| LS5377-6T | 66506 |
| LS5988-2T016 | 98897 |
| LS5377-6T | 98897 |
| LS5988-27016 | 98897 |
| LS5377-6T | 17772 |