NSN 5340-00-500-0403 · NIIN 005000403 · FSC 5340
NO DASHES 5340005000403
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | CUSHION RUBBER FLUOROSILICONE CLASS FQ OR RUBBER FLUOROCARBON CLASS FPM |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| STYL | STYLE DESIGNATOR | |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.952 AND INCHES MAXIMUM 0.982 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION MIL SPEC SINGLE MATERIAL RESPONSE -IL-R-25988 OR MIL SPEC SINGLE MATERIAL RESPONSE -IL-R-25897 |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.029 AND INCHES MAXIMUM 0.036 |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL, AROMATIC AND HYDRAULIC FLUID AND OIL RESISTANT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.734 AND INCHES MAXIMUM 0.764 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND MIL SPEC ALL MATERIAL RESPONSES -IL-S-6721 |
| MATT | MATERIAL | BAND STEEL COMP 321 OR STEEL COMP 348 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.548 AND INCHES MAXIMUM 0.578 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS21919WCJ9 | 1CQA5 |
| MS21919WCJ9 | 2Y159 |
| AS21919WCJ09 | 81343 |
| 5340PL1356309 | 9009H |
| MS21919WCJ9 | 96906 |
| MS21105-9 | 96906 |
| 10420011 | A486G |
| AS21919WCJ09 | 0U583 |
| SAE-AS21919 | 0U583 |