NSN 5340-00-515-0597 · NIIN 005150597 · FSC 5340
NO DASHES 5340005150597
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | WEATHER RESISTANT |
| STYL | STYLE DESIGNATOR | |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 2.173 AND INCHES MAXIMUM 2.203 |
| SFTT | SURFACE TREATMENT | BAND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND MIL SPEC SINGLE TREATMENT RESPONSE -1L-C-5541 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.062 |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3209 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 1.579 AND INCHES MAXIMUM 1.609 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.812 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 4 AND CLASS A |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM44LC28WD35 | 22175 |
| ST9M588WDG35 | 76301 |
| AS21919WDG35 | 81343 |
| MILC8603TYPE4CLASSA | 81349 |
| 815WD35 | 83930 |
| MS21919WDG35 | 96906 |
| 10117387 | A486G |
| AS21919WDG35 | 0U583 |
| SAE-AS21919 | 0U583 |
| S663WDG35 | 18076 |