NSN 5340-00-521-4713 · NIIN 005214713 · FSC 5340
NO DASHES 5340005214713
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.062 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-633 |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.500 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 0.750 |
| SFTT | SURFACE TREATMENT | ZINC |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.555 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.500 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.188 |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| STYL | STYLE DESIGNATOR | |
| AHLG | SECOND LEG CORNER RADIUS | INCHES NOMINAL 0.125 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.198 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.312 |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.188 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.062 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 0.875 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES NOMINAL 0.166 |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| MATT | MATERIAL | STEEL COMP 1010 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.312 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003638244. An older drawing citing one of those numbers resolves here.