NSN 5340-00-545-2193 · NIIN 005452193 · FSC 5340
NO DASHES 5340005452193
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 1.060 AND INCHES MAXIMUM 1.080 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 1.124 AND INCHES MAXIMUM 1.144 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.349 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.089 |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 1.709 AND INCHES MAXIMUM 1.749 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.330 |
| STYL | STYLE DESIGNATOR | |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.330 |
| FEAT | SPECIAL FEATURES | FIRST LEG ANGLE IN DEGREES 100.0 MIN. 104.0 MAX. |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.330 |
| AJFP | FIRST LEG END RADIUS | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5504 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.216 AND INCHES MAXIMUM 0.226 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| MATT | MATERIAL | STEEL COMP 410 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES NOMINAL 0.034 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 318773 | 77445 |