NSN 5340-00-551-4564 · NIIN 005514564 · FSC 5340
NO DASHES 5340005514564
In Stock
CLIP,SPRING TENSION
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.013 AND INCHES MAXIMUM 0.019 |
| ABRY | LENGTH | INCHES MINIMUM 0.510 AND INCHES MAXIMUM 0.550 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.125 AND INCHES MAXIMUM 0.131 |
| ABGL | WIDTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.580 AND INCHES MAXIMUM 0.620 |
| AZWE | DISTANCE FROM LOOP CENTER TO END | INCHES NOMINAL 0.300 |
| CJYS | LOOP/HOLDING DIMENSION | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| MATT | MATERIAL | OVERALL COPPER ALLOY 170 OR COPPER ALLOY 172 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC ALL MATERIAL RESPONSES QQ-C-533 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NASM24066/2 | 80205 |
| M24066/2-224 | 80205 |
| M24066/2-224 | 81349 |
| MIL-C-24066/2 | 81349 |
| M24066/2-024 | 81349 |
| 6014-11C | 91506 |
| 6014-63CC | 91506 |
| 100-300-8A-98 | 99378 |
| MS17160-124 | D9182 |
| M24066-2-224 | D9182 |
| 4116600-82 | 05869 |
| 2562-44234 | 14418 |
Supersedes
This item replaces cancelled NIINs 008524249 · 011991480. An older drawing citing one of those numbers resolves here.