NSN 5340-00-570-9144 · NIIN 005709144 · FSC 5340
NO DASHES 5340005709144
In Stock
BRACKET,DOUBLE ANGLE
Hardware, Commercial
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | STEEL COMP 4130 OR STEEL COMP 8735 |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.600 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 1.000 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 0.620 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.217 AND INCHES MAXIMUM 0.229 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.279 AND INCHES MAXIMUM 0.291 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.310 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 1ST MATERIAL RESPONSE 66 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6357 |
| SFTT | SURFACE TREATMENT | CADMIUM |
| AHQB | CENTER SECTION THICKNESS | INCHES MINIMUM 0.055 AND INCHES MAXIMUM 0.065 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 0.620 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.310 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.220 |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| AHQA | CENTER SECTION WIDTH | INCHES NOMINAL 0.620 |
| CSSR | SECOND LEG ANGLE | DEGREES NOMINAL 90.0 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.055 AND INCHES MAXIMUM 0.065 |
| AJFP | FIRST LEG END RADIUS | INCHES NOMINAL 0.440 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.250 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.055 AND INCHES MAXIMUM 0.065 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE TREATMENT RESPONSE A-S 2400 |
| AHPZ | CENTER SECTION HEIGHT | INCHES NOMINAL 0.500 |
| AJFQ | SECOND LEG END RADIUS | INCHES NOMINAL 0.440 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 225115 | 0AHP5 |
Supersedes
This item replaces cancelled NIIN 006085976. An older drawing citing one of those numbers resolves here.