NSN 5340-00-574-8824 · NIIN 005748824 · FSC 5340
NO DASHES 5340005748824
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.562 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.085 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.085 |
| AHQP | FIRST LEG CORNER RADIUS | INCHES NOMINAL 0.250 |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| MATT | MATERIAL | STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 6370 OR ASSN STD SINGLE MATERIAL RESPONSE SAE 4130 |
| SFTT | SURFACE TREATMENT | CADMIUM |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 1.469 AND INCHES MAXIMUM 1.531 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.197 AND INCHES MAXIMUM 0.200 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.610 AND INCHES MAXIMUM 0.672 |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.710 AND INCHES MAXIMUM 0.772 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 1.064 AND INCHES MAXIMUM 1.126 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 0.969 AND INCHES MAXIMUM 1.031 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.250 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.250 |
| AJFQ | SECOND LEG END RADIUS | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.562 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 1.469 AND INCHES MAXIMUM 1.531 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.719 AND INCHES MAXIMUM 0.781 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 1,CLASS 2 |
| STYL | STYLE DESIGNATOR |