NSN 5340-00-576-6031 · NIIN 005766031 · FSC 5340
NO DASHES 5340005766031
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 1.058 AND INCHES MAXIMUM 1.068 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.750 |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.051 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.845 |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| MATT | MATERIAL | CUSHION STEEL |
| STYL | STYLE DESIGNATOR | |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| X218-12 | 78570 |
| 389-12 | 83930 |
| 5340PL0776834 | 9009H |
| 327B641P012 | 99207 |
| 310633 | D9182 |
| RE127-2001-0010 | 02602 |
| 535D7 | 0AHP5 |
Supersedes
This item replaces cancelled NIINs 005263273 · 005762473 · 010878072. An older drawing citing one of those numbers resolves here.