NSN 5340-00-590-7519 · NIIN 005907519 · FSC 5340
NO DASHES 5340005907519
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AJZU | FIRST LEG STYLE | |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.349 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.250 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.285 AND INCHES MAXIMUM 0.295 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.250 |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| AKBU | SECOND LEG STYLE | |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE TREATMENT RESPONSE A-S 2400 |
| STYL | STYLE DESIGNATOR | |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AJFP | FIRST LEG END RADIUS | INCHES MINIMUM 0.422 AND INCHES MAXIMUM 0.453 |
| AJFQ | SECOND LEG END RADIUS | INCHES MINIMUM 0.422 AND INCHES MAXIMUM 0.453 |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.910 AND INCHES MAXIMUM 0.950 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 0.940 AND INCHES MAXIMUM 0.960 |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| SFTT | SURFACE TREATMENT | CADMIUM |
| AHMA | SECOND LEG SLOT WIDTH | INCHES MINIMUM 0.214 AND INCHES MAXIMUM 0.224 |
| MATT | MATERIAL | STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 6350 |
| AHLZ | SECOND LEG SLOT LENGTH | INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.330 |