NSN 5340-00-597-0055 · NIIN 005970055 · FSC 5340
NO DASHES 5340005970055
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.452 AND INCHES MAXIMUM 0.462 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.026 AND INCHES MAXIMUM 0.036 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.250 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.670 AND INCHES MAXIMUM 0.680 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6739841-4 | 24617 |
| 6739841-4 | 73342 |
| 5340PL0626809 | 9009H |
| MS122902 | 96906 |
| MS1229-02 | D9182 |
| MS122902 | 0U583 |
| SAE AS122900 THRU AS122939 | 0U583 |
Supersedes
This item replaces cancelled NIINs 005586861 · 006804612. An older drawing citing one of those numbers resolves here.