NSN 5340-00-597-9386 · NIIN 005979386 · FSC 5340
NO DASHES 5340005979386
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.026 AND INCHES MAXIMUM 0.036 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.312 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.493 AND INCHES MAXIMUM 0.503 |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| STYL | STYLE DESIGNATOR | |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.706 AND INCHES MAXIMUM 0.726 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 10-90203-5 | 22787 |
| 10-90203-5 | 59501 |
| 10-90203-5 | 77820 |
| 5340PL0926712 | 9009H |
| MS122903 | 96906 |
| MS1229-03 | D9182 |
| MS122903 | 0U583 |
| SAE AS122900 THRU AS122939 | 0U583 |
Supersedes
This item replaces cancelled NIIN 002900761. An older drawing citing one of those numbers resolves here.