NSN 5340-00-598-0224 · NIIN 005980224 · FSC 5340
NO DASHES 5340005980224
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-S-636,COND 4 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | BAND STEEL COMP 1017 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.0285 AND INCHES MAXIMUM 0.0355 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 1.280 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.498 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 1.735 AND INCHES MAXIMUM 1.765 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 1 AND CLASS B |
| SFTT | SURFACE TREATMENT | BAND CADMIUM |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-C-8603 | 81349 |
| MIL-DTL-8603 | 81349 |
| AN742-28 | 88044 |
| MS21103-28 | 96906 |
Supersedes
This item replaces cancelled NIIN 001970707. An older drawing citing one of those numbers resolves here.