NSN 5340-00-598-0528 · NIIN 005980528 · FSC 5340
NO DASHES 5340005980528
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-362,O |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 1.360 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 1.860 AND INCHES MAXIMUM 1.890 |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| MATT | MATERIAL | CUSHION RUBBER |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.578 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| STYL | STYLE DESIGNATOR | |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE IV AND CLASS A |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.046 AND INCHES MAXIMUM 0.054 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-DTL-8603 | 81349 |
| C8603ANDTYPE4ANDCLASSA | 81349 |
| MS21919WDG | 96906 |