NSN 5340-00-663-2986 · NIIN 006632986 · FSC 5340
NO DASHES 5340006632986
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.062 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 0.600 |
| AJZU | FIRST LEG STYLE | |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES NOMINAL 0.343 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.300 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 1.010 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.415 |
| AJFP | FIRST LEG END RADIUS | INCHES MINIMUM 0.422 AND INCHES MAXIMUM 0.453 |
| AJFQ | SECOND LEG END RADIUS | INCHES MINIMUM 0.422 AND INCHES MAXIMUM 0.453 |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.590 AND INCHES MAXIMUM 0.610 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.300 |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.860 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES NOMINAL 0.219 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.062 |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| MATT | MATERIAL | STEEL COMP 8630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
| SFTT | SURFACE TREATMENT | CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE TREATMENT RESPONSE A-S 2400 |
| STYL | STYLE DESIGNATOR | |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 1.320 |
| CSSQ | FIRST LEG ANGLE | DEGREES MINIMUM 0.047 AND DEGREES MAXIMUM 0.078 |