NSN 5340-00-663-9409 · NIIN 006639409 · FSC 5340
NO DASHES 5340006639409
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 1.265 AND INCHES MAXIMUM 1.355 |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 4 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.064 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 1.670 AND INCHES MAXIMUM 1.730 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.395 AND INCHES MAXIMUM 0.425 |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.310 |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625 |
| STYL | STYLE DESIGNATOR | |
| AHLZ | SECOND LEG SLOT LENGTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AHMA | SECOND LEG SLOT WIDTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.270 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.064 |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 1.250 AND INCHES MAXIMUM 1.260 |
| AHQX | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.385 |
| HEAT | HEAT TREATMENT | T-4 SOLUTION HEAT TREATED |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.310 |
| SFTT | SURFACE TREATMENT | ANODIZE |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 005201751 · 009781795. An older drawing citing one of those numbers resolves here.