NSN 5340-00-664-9052 · NIIN 006649052 · FSC 5340
NO DASHES 5340006649052
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
| SFTT | SURFACE TREATMENT | BAND CADMIUM |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| MATT | MATERIAL | BAND STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.298 AND INCHES MAXIMUM 0.328 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 1 CL 2 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3209 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.032 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.545 AND INCHES MAXIMUM 0.575 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.748 |
| STYL | STYLE DESIGNATOR | |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | WEATHER RESISTANT |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS21919WG5 | 81343 |
| MIL-C-8603 | 81349 |
| MIL-DTL-8603 | 81349 |
| MS21919WG5 | 96906 |
| MS21919-G5 | D9182 |
| MS21919-G7 | D9182 |
| 115A032751 | D9182 |
Supersedes
This item replaces cancelled NIIN 002869429. An older drawing citing one of those numbers resolves here.