NSN 5340-00-721-8014 · NIIN 007218014 · FSC 5340
NO DASHES 5340007218014
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL RESISTANT |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.050 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.862 AND INCHES MAXIMUM 0.892 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| MATT | MATERIAL | CUSHION RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3215 |
| SFTT | SURFACE TREATMENT | BAND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541 |
| STYL | STYLE DESIGNATOR | |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.798 AND INCHES MAXIMUM 0.828 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.095 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM44LC28WD13YN | 22175 |
| ST9M588WDF13 | 76301 |
| AS21919WDF13 | 81343 |
| MS21919WDF13 | 81349 |
| MS21919WDF13 | 96906 |
| AS21919WDF13 | 0U583 |
| SAE-AS21919 | 0U583 |
| S66WDF13 | 18076 |
Supersedes
This item replaces cancelled NIINs 014587538 · 005979406 · 012022062. An older drawing citing one of those numbers resolves here.