NSN 5340-00-733-9365 · NIIN 007339365 · FSC 5340
NO DASHES 5340007339365
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.375 |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 1.250 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 2.250 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.500 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE TT--636 |
| AHLH | SECOND LEG END WIDTH | INCHES NOMINAL 0.500 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES NOMINAL 0.406 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.401 AND INCHES MAXIMUM 0.411 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.875 |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES NOMINAL 0.875 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 1.000 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 1.000 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.149 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.149 |
| AJZU | FIRST LEG STYLE | |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 2.625 |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | STEEL |
| SFTT | SURFACE TREATMENT | PAINT |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.375 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-13281,C1,GR2 |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |