NSN 5340-00-757-8265 · NIIN 007578265 · FSC 5340
NO DASHES 5340007578265
In Stock
BRACKET,DOUBLE ANGLE
Hardware, Commercial
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSSR | SECOND LEG ANGLE | DEGREES NOMINAL 135.0 |
| MATT | MATERIAL | STEEL COMP 410 |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 135.0 |
| AJFP | FIRST LEG END RADIUS | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.406 |
| AJFQ | SECOND LEG END RADIUS | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.406 |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 0.860 AND INCHES MAXIMUM 0.880 |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.214 AND INCHES MAXIMUM 0.224 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.214 AND INCHES MAXIMUM 0.224 |
| ZZZV | FSC APPLICATION DATA | ENGINE,ACFT,TURBO-JET |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHPZ | CENTER SECTION HEIGHT | INCHES MINIMUM 0.346 AND INCHES MAXIMUM 0.378 |
| AHQA | CENTER SECTION WIDTH | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AARN | FABRICATION METHOD | STAMPED |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.860 AND INCHES MAXIMUM 0.880 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5504 |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| AHQB | CENTER SECTION THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 427242 | 77445 |