NSN 5340-00-775-6514 · NIIN 007756514 · FSC 5340
NO DASHES 5340007756514
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.630 AND INCHES MAXIMUM 0.670 |
| MATT | MATERIAL | STEEL COMP 4130 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AJFQ | SECOND LEG END RADIUS | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AJZU | FIRST LEG STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 6350 |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.270 AND INCHES MAXIMUM 0.290 |
| AJFP | FIRST LEG END RADIUS | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.070 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.070 |
| SFTT | SURFACE TREATMENT | CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE TREATMENT RESPONSE A-S 2400 |
| STYL | STYLE DESIGNATOR | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.210 AND INCHES MAXIMUM 0.230 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 1.110 AND INCHES MAXIMUM 1.115 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| W102E-201 | 53086 |
| 1-160-468-01 | 78U39 |
| 1-160-468-01 | 91547 |
| 1-160-468-01 | 99193 |
| 1-160-468-01 | A0189 |
| 1-160-468-01 | 06320 |