NSN 5340-00-807-4335 · NIIN 008074335 · FSC 5340
NO DASHES 5340008074335
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| MATT | MATERIAL | STEEL COMP 302 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5059 |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| AJFP | FIRST LEG END RADIUS | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| AJFQ | SECOND LEG END RADIUS | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| AJZU | FIRST LEG STYLE | |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.053 AND INCHES MAXIMUM 0.073 |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.118 AND INCHES MAXIMUM 0.138 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| HEAT | HEAT TREATMENT | ANNEALED |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.053 AND INCHES MAXIMUM 0.073 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.214 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 738461-1 | 73030 |
| AN743C13 | 88044 |
| AN743C13 | AC910 |
| AN743C-13 | 0U583 |
| SAE-AS7431 | 0U583 |