NSN 5340-00-815-9068 · NIIN 008159068 · FSC 5340
NO DASHES 5340008159068
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| STYL | STYLE DESIGNATOR | |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| AJFP | FIRST LEG END RADIUS | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-S-8625,TYE 2 |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| AJFQ | SECOND LEG END RADIUS | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.053 AND INCHES MAXIMUM 0.073 |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.214 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.214 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.053 AND INCHES MAXIMUM 0.073 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5,ALCLAD T3 |
| SFTT | SURFACE TREATMENT | ANODIZE |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 0.680 AND INCHES MAXIMUM 0.700 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AN743B12 | 81343 |
| AS7431 | 81343 |
| AN743B12 | 88044 |
| SAE-AS7431 | 0U583 |
| AN743B12 | 0U583 |