NSN 5340-00-817-1413 · NIIN 008171413 · FSC 5340
NO DASHES 5340008171413
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXWJ | FASTENING DEVICE TYPE | STUD TURNLOCK |
| AHMM | LUG WIDTH | INCHES MINIMUM 1.260 AND INCHES MAXIMUM 1.320 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.064 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.290 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-S-766 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.080 |
| FEAT | SPECIAL FEATURES | ELONGATED HOLE IN BOTH TONGUES |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.640 |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.500 |
| BZTQ | LUG HOLE DIAMETER | INCHES NOMINAL 0.197 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | BAND STEEL COMP 305 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7C1-8W | 71286 |
| 7C1W8 | 71286 |
| 7C1-8W | D0680 |
| A916608/000 | K0268 |
| 916608/000 | K0268 |
| 1820545-001 | 10001 |
| 144-900-101 | 15090 |
Supersedes
This item replaces cancelled NIIN 008172411. An older drawing citing one of those numbers resolves here.