NSN 5340-00-830-9622 · NIIN 008309622 · FSC 5340
NO DASHES 5340008309622
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHLG | SECOND LEG CORNER RADIUS | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.141 |
| SFTT | SURFACE TREATMENT | ANODIZE |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.734 AND INCHES MAXIMUM 0.766 |
| STYL | STYLE DESIGNATOR | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| FEAT | SPECIAL FEATURES | FURNISHED WITH ONE NUT AND TWO RIVETS |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.141 |
| MATT | MATERIAL | ALUMINUM ALLOY 6063 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-200 TO 9,T5 |
| AJZU | FIRST LEG STYLE | |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 0.984 AND INCHES MAXIMUM 1.016 |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 1.797 AND INCHES MAXIMUM 1.828 |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 2.422 AND INCHES MAXIMUM 2.453 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.141 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 1.933 AND INCHES MAXIMUM 1.943 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.234 AND INCHES MAXIMUM 0.266 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.328 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.225 AND INCHES MAXIMUM 0.234 |