NSN 5340-00-842-5946 · NIIN 008425946 · FSC 5340
NO DASHES 5340008425946
In Stock
COVER,ACCESS
Hardware, Commercial
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | INCHES MINIMUM 0.745 AND INCHES MAXIMUM 0.755 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 11 |
| ABRY | LENGTH | INCHES MINIMUM 1.865 AND INCHES MAXIMUM 1.875 |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| ADNZ | DISTANCE BETWEEN HOLES ALONG WIDTH | INCHES NOMINAL 5.366 |
| ADPC | DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH | INCHES MINIMUM 0.547 AND INCHES MAXIMUM 0.562 |
| ABGL | WIDTH | INCHES MINIMUM 5.740 AND INCHES MAXIMUM 5.750 |
| ABMW | PERIPHERAL SHAPE STYLE | |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.257 AND INCHES MAXIMUM 0.259 |
| SFTT | SURFACE TREATMENT | ANODIZE AND PRIMER |
| ADPR | BODY THICKNESS | INCHES NOMINAL 0.064 |
| ADQB | SECURING DEVICE TYPE | TURNLOCK FASTENER |
| ADQK | MOUNTING OPENING SHAPE STYLE | |
| ADPD | DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH | INCHES MINIMUM 0.192 AND INCHES MAXIMUM 0.202 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST TREATMENT RESPONSE -IL-A-8625 AND MIL SPEC 2ND TREATMENT RESPONSE -IL--8585 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.