NSN 5340-00-868-2236 · NIIN 008682236 · FSC 5340
NO DASHES 5340008682236
In Stock
BRACKET,DOUBLE ANGLE
Hardware, Commercial
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHQP | FIRST LEG CORNER RADIUS | INCHES NOMINAL 0.040 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 1.090 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 1.090 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES NOMINAL 0.040 |
| AJZU | FIRST LEG STYLE | |
| SFTT | SURFACE TREATMENT | CADMIUM |
| STYL | STYLE DESIGNATOR | |
| CSSR | SECOND LEG ANGLE | DEGREES NOMINAL 90.0 |
| AHQB | CENTER SECTION THICKNESS | INCHES NOMINAL 0.075 |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.440 |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.390 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 0.635 |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES NOMINAL 0.127 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES NOMINAL 0.071 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.782 |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES NOMINAL 0.153 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.154 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.207 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.075 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.075 |
| AHPZ | CENTER SECTION HEIGHT | INCHES NOMINAL 0.295 |
| AHQA | CENTER SECTION WIDTH | INCHES NOMINAL 1.090 |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.325 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.138 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7469-1 | 99167 |