NSN 5340-00-891-3412 · NIIN 008913412 · FSC 5340
NO DASHES 5340008913412
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.065 AND INCHES MAXIMUM 0.083 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.758 AND INCHES MAXIMUM 0.808 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.383 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.625 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AST- D4066 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.585 AND INCHES MAXIMUM 0.615 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL PLASTIC POLYHEXAMETHYLENE AMIDE |
| ABMZ | DIAMETER | INCHES MINIMUM 0.198 AND INCHES MAXIMUM 0.213 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS25281-F10 | 81343 |
| MS25281-F10 | 81349 |
| 5340PL1828602 | 9009H |
| 5340PL1197953 | 9009H |
| MS25281F10 | 96906 |
| MS25281-F10 | D9182 |
| 10117493 | A486G |
| 575-140021 | D9182 |
| MS25281-10 | D9182 |
| MS25281-F10 | 0U583 |
| SAE-AS25281 | 0U583 |
Supersedes
This item replaces cancelled NIIN 016828673. An older drawing citing one of those numbers resolves here.