NSN 5340-00-901-4790 · NIIN 009014790 · FSC 5340
NO DASHES 5340009014790
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION MFR REF SINGLE MATERIAL RESPONSE D6-54312-1 FSC- 81205 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.623 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.027 AND INCHES MAXIMUM 0.037 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.438 |
| MATT | MATERIAL | BAND STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 |
| MATT | MATERIAL | CUSHION RUBBER SILICONE CLASS Q |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SPECIFICATION 81205-BACC10GE |
| SFTT | SURFACE TREATMENT | BAND CADMIUM |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMZ | DIAMETER | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.209 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.841 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM44LC13WS7R | 22175 |
| BACC10GE7 | 81205 |
| BACC10BH7RW | 81205 |
| 400WCS7 | 83930 |
| 509S7 | 83930 |
| TA12C32WS7 | 84971 |
| TA4C81WS7 | 84971 |
| S369WH7 | 18076 |
Supersedes
This item replaces cancelled NIIN 006520389. An older drawing citing one of those numbers resolves here.