NSN 5340-00-921-6993 · NIIN 009216993 · FSC 5340
NO DASHES 5340009216993
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 1.365 AND INCHES MAXIMUM 1.385 |
| SFTT | SURFACE TREATMENT | BAND CADMIUM OR ZINC OR CHROMATE |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.022 AND INCHES MAXIMUM 0.042 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | BAND STEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1020 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AZDA | LOOP WIDTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| AZDB | LOOP LENGTH | INCHES MINIMUM 1.490 AND INCHES MAXIMUM 1.510 |
| MATT | MATERIAL | CUSHION RUBBER SYNTHETIC |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 1.146 AND INCHES MAXIMUM 1.166 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.193 AND INCHES MAXIMUM 0.213 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS21334-32 | 80205 |
| NASM21334 | 80205 |
| MS21334-32 | 96906 |