NSN 5340-00-937-3139 · NIIN 009373139 · FSC 5340
NO DASHES 5340009373139
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKBU | SECOND LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 0.800 AND INCHES MAXIMUM 0.840 |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| AHQX | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES NOMINAL 0.360 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.400 |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES NOMINAL 0.480 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.038 AND INCHES MAXIMUM 0.058 |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.157 AND INCHES MAXIMUM 0.164 |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| MATT | MATERIAL | STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD 1ST MATERIAL RESPONSE AST- A109 OR ASSN STD 2ND MATERIAL RESPONSE AST- A611 OR ASSN STD 3RD MATERIAL RESPONSE AST- A635 |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 1.100 AND INCHES MAXIMUM 1.140 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.435 AND INCHES MAXIMUM 0.443 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC ALL TREATMENT RESPONSES QQ--416,TY 2,CL2 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.170 |
| AJZU | FIRST LEG STYLE | |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.038 AND INCHES MAXIMUM 0.058 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.400 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.170 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 10210415 | 18876 |