NSN 5340-00-990-3174 · NIIN 009903174 · FSC 5340
NO DASHES 5340009903174
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5504 |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| AKBU | SECOND LEG STYLE | |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.265 |
| FEAT | SPECIAL FEATURES | HEAT TREATMENT: QUENCHED AND TEMPERED |
| AJFP | FIRST LEG END RADIUS | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| AJFQ | SECOND LEG END RADIUS | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | STEEL COMP 410 |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.860 AND INCHES MAXIMUM 0.890 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 1.235 AND INCHES MAXIMUM 1.265 |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| AHLL | FIRST LEG SLOT LENGTH | INCHES MINIMUM 0.278 AND INCHES MAXIMUM 0.288 |
| AHLM | FIRST LEG SLOT WIDTH | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.210 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.265 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.265 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.265 |
| AHLZ | SECOND LEG SLOT LENGTH | INCHES MINIMUM 0.278 AND INCHES MAXIMUM 0.288 |
| AHMA | SECOND LEG SLOT WIDTH | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.210 |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS9228-13 | 96906 |
| MS9228-13 | 0U583 |
| SAE-AS9228 | 0U583 |