NSN 5340-00-990-5186 · NIIN 009905186 · FSC 5340
NO DASHES 5340009905186
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| SFTT | SURFACE TREATMENT | BAND ANODIZE |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.029 AND INCHES MAXIMUM 0.035 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | CUSHION PLASTIC |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.780 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5,T4 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.375 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.592 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.201 AND INCHES MAXIMUM 0.209 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM43LC6D8T | 22175 |
| C2874D8 | 81755 |
| S2880D8 | 81755 |
| TA11C44D8T | 84971 |
| 477-8 | 83930 |
| 5340PL1691006 | 9009H |
| 5340PL0652110 | 9009H |
| 5340PL1731434 | 9009H |
| S280D8 | 18076 |
Supersedes
This item replaces cancelled NIIN 011074060. An older drawing citing one of those numbers resolves here.