NSN 5340-00-997-7022 · NIIN 009977022 · FSC 5340
NO DASHES 5340009977022
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 1.423 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.641 |
| MATT | MATERIAL | CUSHION PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 1.985 AND INCHES MAXIMUM 2.015 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5 T4 |
| SFTT | SURFACE TREATMENT | BAND ANODIZE |
| STYL | STYLE DESIGNATOR | |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.047 AND INCHES MAXIMUM 0.053 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.201 AND INCHES MAXIMUM 0.209 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM44LC9D32T | 22175 |
| C2874D32 | 81755 |
| TA11C44D32T | 84971 |
| 477-32 | 83930 |
| 5340PL1825405 | 9009H |
| 5340PL0846448 | 9009H |
| S280D32 | 18076 |
Supersedes
This item replaces cancelled NIIN 011082912. An older drawing citing one of those numbers resolves here.