NSN 5340-00-998-3164 · NIIN 009983164 · FSC 5340
NO DASHES 5340009983164
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| FEAT | SPECIAL FEATURES | NON-ASBESTOS |
| MATT | MATERIAL | CUSHION PLASTIC TETRAFLUOROETHYLENE |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.058 AND INCHES MAXIMUM 0.070 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 1.275 AND INCHES MAXIMUM 1.285 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 1.250 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| STYL | STYLE DESIGNATOR | |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 1.047 AND INCHES MAXIMUM 1.077 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| J1220G18 | 1CQA5 |
| J1220G18 | 83930 |
| 5340PL0886178 | 9009H |
| J1220G18 | 99207 |
| J220G18(NONASBESTOS) | 07482 |
| J1220G18 | 07482 |
Supersedes
This item replaces cancelled NIINs 013996900 · 012884485. An older drawing citing one of those numbers resolves here.