NSN 5340-01-043-0197 · NIIN 010430197 · FSC 5340
NO DASHES 5340010430197
In Stock
CLAMP,BLOCK,SECTION
Hardware, Commercial
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.250 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.380 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.190 AND INCHES MAXIMUM 0.196 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | INCHES NOMINAL 0.188 |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | INCHES NOMINAL 2.375 |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE(S) |
| BYGG | BLOCK HEIGHT | INCHES NOMINAL 0.315 |
| CWTD | CLAMPING HOLE QUANTITY | 2 |
| CWWM | CLAMPING HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.252 |
| CWWM | CLAMPING HOLE DIAMETER | SECOND HOLE INCHES NOMINAL 0.190 |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | INCHES NOMINAL 0.250 |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | INCHES NOMINAL 0.562 |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | INCHES NOMINAL 2.344 |
| MATT | MATERIAL | PLASTIC |
| STYL | STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GP105AU | 26512 |
| GM4104 | 26512 |
| GSS11900C | 26512 |
| A51L21085-23 | 26512 |
| A51L21085-23 | 61174 |
| A51L21085-23 | 79RG9 |