NSN 5340-01-047-8311 · NIIN 010478311 · FSC 5340
NO DASHES 5340010478311
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | WEATHER RESISTANT |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.214 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.051 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 1.459 AND INCHES MAXIMUM 1.521 |
| AZDA | LOOP WIDTH | INCHES NOMINAL 0.750 |
| AZDB | LOOP LENGTH | INCHES NOMINAL 2.000 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 1.677 AND INCHES MAXIMUM 1.739 |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR OR RUBBER SYNTHETIC |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 4 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD 1ST MATERIAL RESPONSE A-S 3209 OR ASSN STD 2ND MATERIAL RESPONSE SAE SC715 |
| STYL | STYLE DESIGNATOR |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 202-23506D12W32 | 22175 |
| JM44RC2WD12-32 | 22175 |
| 497WD12-32 | 73323 |
| 202-23506D12W32 | 80378 |
| 497WD12-32 | 81982 |
| 202-23506D12W32 | 84971 |
| 202-23506D12W32 | 83930 |
| TA520WD12-32 | 84971 |